-
-
Your cart0 item(s), $0.00 total
-
-
BK650EIFeatures
APC Back-UPS 650, 230V
Serial connectivity
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Back-UPSFeatures & Benefits
Marketing Features
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Manageability
Audible alarms
Provides notification of changing utility power and UPS power conditions
LED status display
Quickly understand unit and power status with visual indicators.
Safety
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Protection
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Availability
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Output
Output power capacity
400Watts / 650VA
Max Configurable Power (Watts)
400Watts / 650VA
Nominal Output Voltage
230V
Output Frequency (sync to mains)
47 - 63 Hz
Output Frequency (not synced)
50/60 Hz +/-1 Hz
Topology
Standby
Waveform type
Stepped approximation to a sinewave
Output Connections
(3) IEC 320 C13 (Battery Backup)
(2) IEC Jumpers (selector_surgetitle)
(1) IEC 320 C13 (selector_surgetitle)
Transfer Time
6ms typical : 10ms maximum
Input
Nominal Input Voltage
230V
Input frequency
50/60 Hz +/- 3 Hz (auto sensing)
Input Connections
IEC-320 C14
Cord Length
2meters
Input voltage range for main operations
180 - 266V
Input voltage adjustable range for mains operation
160 - 286V
Number of Power Cords
2
Maximum Input Current
7.0A
Batteries & Runtime
Battery type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time
8hour(s)
Replacement Battery
Expected Battery Life (years)
4 - 6
RBC Quantity
1
Battery Volt-Amp-Hour Capacity
95
Runtime
Efficiency
Communications & Management
Interface Port(s)
Optional Simple Signalling RS232 cable , USB
Control panel
LED status display with On Line : On Battery : Replace Battery and Overload indicators
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
Surge energy rating
310Joules
Data Line Protection
Analog phone line for phone/fax/modem/DSL (RJ-45 connector)
Physical
Maximum Height
165mm , 16.5cm
Maximum Width
91mm , 9.1cm
Maximum Depth
284mm , 28.4cm
Net Weight
6.03kg
Shipping weight
7.31kg
Shipping Height
494mm , 49.4cm
Shipping Width
185mm , 18.5cm
Shipping Depth
415mm , 41.5cm
Color
Beige
Master Carton Units
1.0
Units per Pallet
48.0
SCC Codes
1073130421978 8
Environmental
Operating Environment
0 - 40 °C
Operating Relative Humidity
5 - 95 %
Operating Elevation
0-3000meters
Storage Temperature
-15 - 45 °C
Storage Relative Humidity
5 - 95 %
Storage Elevation
0-15000meters
Audible noise at 1 meter from surface of unit
45.0dBA
Conformance
Approvals
A-tick, C-tick, CE, ENERGY STAR (EU), GOST, NEMKO
Equipment protection policy
Lifetime : 100000 Euro, Lifetime : 50000 GBP
Standard warranty
2 years repair or replace
Sustainable Offer Status
RoHS
Compliant
PEP
Available in Documentation tab
EOLI
Available in Documentation tab
Support data are not available.