KVR24N17S8/8
8GB 1Rx8 1G x 64-Bit PC4-2400
CL17 288-Pin DIMM
DESCRIPTION
This document describes ValueRAM's KVR24N17S8/8 is a 1G x 64-bit
(8GB) DDR4-2400 CL17 SDRAM (Synchronous DRAM), 1Rx8,
memory module, based on eight 1G x 8-bit FBGA components. The
SPD is programmed to JEDEC standard latency DDR4-2400 timing of
17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The
electrical and mechanical specifications are as follows:
FEATURES
•Power Supply: VDD=1.2V Typical
•VDDQ = 1.2V Typical
•VPP - 2.5V Typical
•VDDSPD=2.2V to 3.6V
•Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
•Low-power auto self refresh (LPASR)
•Data bus inversion (DBI) for data bus
•On-die VREFDQ generation and calibration
•Single-rank
•On-board I2 serial presence-detect (SPD) EEPROM
•16 internal banks; 4 groups of 4 banks each
•Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
•Selectable BC4 or BL8 on-the-fly (OTF)
•Fly-by topology
•Terminated control command and address bus
•PCB: Height 1.23” (31.25mm)
•RoHS Compliant and Halogen-Fre
Specification:
CL(IDD) 17 cycles
Row Cycle Time (tRCmin) 45.75ns(min.)
Refresh to Active/Refresh 350ns(min.)
Command Time (tRFCmin)
Row Active Time (tRASmin) 32ns(min.)
Maximum Operating Power TBD W*
UL Rating 94 V - 0
Operating Temperature 0 to +85
Storage Temperature -55 to +100
Support data are not available.